3E-12 REAR SUSPENSION
3) Install parking brake cable clamp (1).
4) Install shock absorber (1) to rear axle (2).
5) Tighten shock absorber lower bolt (3) temporarily by hand.
6) Remove floor jack from rear axle.
7) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque for wheel nuts
.
(a): 85 N
m (8.5 kg-m, 61.5 lb-ft)
8) Lower hoist and vehicle in non loaded condition, tighten trailing
arm front and rear nuts and shock absorber lower bolt to speci-
fied torque.
Tightening Torque
.
(b): 80 N
m (8.0 kg-m, 58.0 lb-ft)
.
(c): 90 N
m (9.0 kg-m, 65.0 lb-ft)
.
(d): 63 N
m (6.3 kg-m, 45.5 lb-ft)