Suzuki Wagon R Manual page 75

1B-16 AIR CONDITIONING (OPTIONAL)
NOTE:
When refrigerant line must be disconnected and connected to remove and reinstall any component of A/C
system, be sure to observe the following instructions.
D When disconnecting any line from the system, install a blinding plug or cap to fitting of such line immedi-
ately.
D When connecting hoses and pipes to each other respectively, previously apply a few drops of compres-
sor oil (refrigerating oil) to O-ring.
ON-VEHICLE SERVICE
A/C CONDENSER ASSEMBLY
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Recover refrigerant from refrigeration system by using recovery
and recycling equipment.
3) Remove front bumper. Refer to FRONT BUMPER in BODY
SERVICE Section.
4) Loosen discharge hose bolt (1) and liquid pipe bolt (2).
5) Loosen condenser mounting bolts (3).
6) Remove condenser assembly (4).
1. Suction hose:
Apply compressor oil
(refrigerant oil) to O-ring
2. Discharge hose:
Apply compressor oil
(refrigerant oil) to O-ring
3. Liquid pipe:
Apply compressor oil
(refrigerant oil) to O-ring
4. Expansion valve:
Apply compressor oil
(refrigerant oil) to O-ring