Suzuki Wagon R Manual page 269

5A-16 BRAKES PIPE / HOSE / MASTER CYLINDER
2
"L"
1
1, (a)
INSPECTION & ADJUSTMENT
1) Confirm the following before inspection and adjustment.
D Fuel tank is filled with fuel fully.
D Vehicle is equipped with spare tire, tools, jack and jack handle.
D Vehicle is free from any other load.
D Vehicle is placed on level floor.
2) Check spring length between spring end (1) and spring bolt cen-
ter (2).
Spring length
"L": About 99.3 mm (3.9 in.)
If it is out of specification, adjust it as follows.
3) Loosen spring bracket bolt (1) and stretch spring to specified
length by pushing spring bracket (2) with a driver or the like.
4) At that position in step 3), tighten spring bracket bolt to specified
torque.
Tightening Torque
.
(a): 5 N m (0.5 kg-m, 4.0 lb-ft)
5) Confirm fluid pressure referring to Fluid Pressure Test in SEC-
TION 5.