Suzuki Wagon R Manual page 278

FRONT DISC BRAKE CALIPER
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove brake flexible hose bolt (1) from caliper (2). As this will
allow fluid to flow out of hose, have a container (3) ready before-
hand.
3) Remove caliper pin bolts (1).
4) Remove caliper.
DISASSEMBLY
WARNING:
Do not apply too much highly compressed air which will
cause piston to jump out of cylinder. It should be taken out
gradually with moderately compressed air. Do not place
your fingers in front of piston when using compressed air.
Before disassembly, clean all around caliper with brake fluid.
1) Blow compressed air into cylinder through bolt hole where flex-
ible hose was fitted.
With this air pressure, piston can be pushed out of cylinder.
FRONT BRAKE 5B-7