ABS DIAGNOSTIC FLOW TABLE
Refer to the following pages for the details of each step.
STEP
1) Perform "Customer Complaint Analysis".
2) Perform "Problem Symptom Confirmation".
1
3) Perform "Diagnostic Trouble Code Check, Record and
Clearance".
Is there any malfunction DTC?
1) Perform "Driving Test".
2
Is trouble symptom identified?
1) Check diagnostic trouble code.
3
Is it malfunction code?
1) Inspect and repair referring to applicable diagnostic
trouble code table in this section.
4
2) Perform "Final Confirmation Test" after cleared DTC.
Does trouble recur?
1) Inspect and repair referring to "DIAGNOSIS" in
5
"BRAKES" section.
2) Perform "Final Confirmation Test".
1) Check intermittent troubles referring to "Intermittent
and Poor Connection" in "GENERAL INFORMATION"
section and related circuit of trouble code recorded
6
in step 2.
2) Perform "Final Confirmation Test" after cleared
diagnostic trouble code.
Does trouble recur?
1) Perform "Diagnostic Trouble Code Check, Record and
7
Clearance".
Is there any malfunction code?
ACTION
ANTILOCK BRAKE SYSTEM (ABS) 5E1-9
YES
Go to Step 2.
Go to Step 5.
Go to Step 3.
Go to Step 6.
Go to Step 4.
Go to Step 5.
Go to Step 7.
End.
–
Go to Step 7.
End.
Go to Step 2.
Go to Step 5.
NO
–