Suzuki Wagon R Manual page 267

5A-14 BRAKES PIPE / HOSE / MASTER CYLINDER
LSPV (Load Sensing Proportioning Valve) ASSEMBLY (if equipped)
: Tightening Torque
. - 1. LSPV bracket
26 N m (2.6 kg-m)
- 2. LSPV assembly
2-1. Spring
2-2. Spring bracket
2-3. Screw
- 3. Brake pipe
.
5 N m (0.5 kg-m)
CAUTION:
D Never disassemble LSPV assembly. Disassembly will
spoil its original performance. Replace with new one if de-
tective.
D Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
REMOVAL
1) Clean around reservoir cap and take out fluid with syringe or
such.
2) Hoist vehicle.
3) Disconnect brake pipes from LSPV assembly (1).
Special Tool
(A): 09950-78230 (10 x 11 mm)
4) Remove nut (1) and detach spring end from rear axle (2).
5) Remove LSPV assembly (3) with bracket (4) from vehicle body.