Suzuki Wagon R Manual page 287

5C-4 PARKING AND REAR BRAKE
PARKING BRAKE LEVER
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove console box.
3) Block vehicle wheels and release parking brake lever.
4) Disconnect lead wire of parking brake switch at coupler.
5) Loosen parking brake cable adjusting nut (1).
6) Remove parking brake lever bolts (1) and then remove parking
brake lever assembly (2) with equalizer (3).
7) Remove console box bracket (4) from parking brake lever as-
sembly.
NOTE:
Don't disassemble parking brake lever switch. It must be re-
moved and installed as a complete switch assembly.
INSTALLATION
1) Install in reverse order of REMOVAL procedure.
Check equalizer inclined angle.
Angle "a": within 15 degrees
Tightening Torque
.
(a): 26 N m (2.6 kg-m, 19.0 lb-ft)
2) After all parts are installed, parking brake lever needs to be ad-
justed. Refer to PARKING BRAKE INSPECTION AND AD-
JUSTMENT in SECTION 5.
3) Check brake drum for dragging and brake system for proper per-
formance.