Suzuki Wagon R Manual page 203

3E-10 REAR SUSPENSION
Vehicle body side
Spring side
SPRING UPPER SEAT
REMOVAL
1) Remove coil spring. For details, refer to COIL SPRING RE-
MOVAL in this section.
2) Remove spring upper seat (1).
INSTALLATION
1) Install spring upper seat (1).
NOTE:
For proper installing direction of spring upper seat, refer to
figure at left.
2) Install coil spring. For details, refer to COIL SPRING INSTALLA-
TION in this section.
TRAILING ARM
REMOVAL
1) Hoist vehicle and remove rear wheel.
2) Support rear axle (1) by using floor jack (2).
CAUTION:
Never apply floor jack against lateral rod as it may get de-
formed.
3) Remove shock absorber lower bolt (1).
4) For ABS equipped vehicle, disconnect wheel speed sensor lead
wire clamp from trailing arm.