Suzuki Wagon R Manual page 468

THROTTLE BODY AND INTAKE MANIFOLD
FWD
3) Install ignition coil assemblies (1) with high-tension cord.
4) Connect PCV valve and breather hose to head cover.
5) Install suction pipe to air cleaner assembly, referring to INSTAL-
LATION of AIR CLEANER ASSEMBLY in this section.
6) Connect negative cable at battery.
REMOVAL
1) Relieve fuel pressure according to procedure described in Sec-
tion 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator are
still hot. Scalding fluid and steam can be blown out under
pressure if plug and cap are taken off too soon.
ENGINE MECHANICAL 6A1-13
1. Intake manifold
2. Throttle body
3. Gasket
4. EGR valve
5. Fuel delivery pipe
6. Fuel injector
7. PCV valve
8. EGR pipe
9. EVAP canister purge valve
10. MAP sensor
: Do not reuse.