Suzuki Wagon R Manual page 152

B1
B3
09931-76011
SUZUKI scan tool (Tech 1A) kit
ELECTRICAL POWER STEERING (EPS) SYSTEM (IF EQUIPPED) 3B1-31
5) Connect battery (1) between "B1" and "B2". Check that motor ro-
tates smoothly, then messure current between "B1" and "B2" us-
B2
ing ammeter (2) as shown in left figure.
Standard current (reference value) : About 0.65 A
If check result is not satisfactory, replace steering column as-
sembly.
6) Connect battery (1) between "B3" and "B4", then check that
clutch operation sound is heard.
If check result is not satisfactory, replace steering column as-
B4
sembly.
STEERING COLUMN ASSEMBLY
Refer to "STEERING WHEEL AND COLUMN" section for removal
and installation of steering column assembly but disconnect all cou-
plers from P/S control module beforehand.
SPECIAL TOOLS
1. Storage case
2. Operator's manual
3. Tech 1A
4. DLC cable
5. Test lead/probe
6. Power source cable
7. DLC cable adapter
8. Self-test adapter
Mass storage cartridge
09931-76030
16/14 pin DLC cable