Rear Shock Absorber - Suzuki Wagon R Manual

REAR SHOCK ABSORBER

REMOVAL
1) Hoist vehicle.
Vehicle
center side
2) Support rear axle (1) by using floor jack to prevent it from lower-
ing.
3) Remove lower bolt (2).
4) Remove upper bolt (3) and nut (4). Then remove shock absorber
(5).
INSTALLATION
1) Install shock absorber (5), referring to left figure.
Tighten bolt and nut temporarily by hand.
2) Remove floor jack from rear axle (1) and lower hoist.
3) Tighten bolts to specified torque.
Tightening Torque
(a): 63 N
COIL SPRING
REMOVAL
1) Hoist vehicle and remove rear wheel (s).
2) Support rear axle (1) by using floor jack (2) to prevent it from low-
ering.
3) Remove lateral rod body side bolt and nut (1).
4) Remove brake flexible hose E-ring (1).
.
m (6.3 kg-m, 45.5 lb-ft)
REAR SUSPENSION 3E-7