Suzuki Ignis Service Manual page 1741

6-3-82 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z13DT ENGINE)
Result Table (For RM413D)
Result Cause Of Fault
E01 • Defective component:
ECM
NOTE:
If ECM is replaced, register vehicle specification into ECM by performing procedure
described in "ECM registration" in Section 6E3.
E02 • High transition resistance between:
Ground
&
ECM – Wiring harness connector (wiring harness side) terminal E27-1, E27-2, E27-3
E03 • High transition resistance between:
Battery – Positive (+) terminal
&
ECM – Wiring harness connector (wiring harness side) terminal E27-50
E04 • Check the following component for proper operation:
Battery
and/or
Generator
and/or
Starting Motor
and/or
• Check the following circuit for proper operation:
Terminal C47-1, C59-1 and system main fuse
E05 • Defective component:
Generator
E06 • Short circuit to ground between:
Circuit Fuse – Output contact
&
ECM – Wiring harness connector (wiring harness side) terminal E27-50
&
Brake Light Switch – Wiring harness connector (wiring harness side) terminal E36-1, E36-4
• Circuit interruption between:
Circuit Fuse – Output contact
&
ECM – Wiring harness connector (wiring harness side) terminal E27-50
or
Defective component:
Brake Light Switch