SSANGYONG Y200 Manual page 2244

DI09-18
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Removal and Installation
1. Turn the ignition switch to "OFF" position and disconnect
the negative battery cable.
2. Set aside the harnesses on the cylinder head.
Y220_09015
3. Disconnect the glow plug connectors and loosen the glow
plugs.
Installation Notice
Tightening torque
Y220_09016
4. Remove the glow plugs from the cylinder head with a
special tool. Plug the openings of the glow plugs with
sealing caps.
Y220_09017
ELECTRIC DEVICES AND SENSORS
DI ENG SM - 2004.4