Match Address Local - Cisco NCS 1004 Command Reference Manual

Commands

match address local

To specify the IP address of the local node, use the match address local command in the IKEv2 policy
configuration mode.
match address local ipv4-address
Syntax Description
ipv4-address
None
Command Default
IKEv2 policy configuration
Command Modes
Command History
Release
Release
7.0.1
Example
The following is a sample in which an IKEv2 policy is configured.
RP/0/RP0/CPU0:ios#configure
Thu Mar
RP/0/RP0/CPU0:ios(config)#ikev2 policy mypolicy
RP/0/RP0/CPU0:ios(config-ikev2-policy-mypolicy)#proposal proposal1
RP/0/RP0/CPU0:ios(config-ikev2-policy-mypolicy)#match address local 10.0.0.1
RP/0/RP0/CPU0:ios(config-ikev2-policy-mypolicy)#commit
Thu Mar
RP/0/RP0/CPU0:ios(config-ikev2-policy-mypolicy)#exit
RP/0/RP0/CPU0:ios(config)#exit
RP/0/RP0/CPU0:ios#show ikev2 policy mypolicy
Thu Mar
Policy Name
===============================================================================
Total number of match local addr
Match address local
-------------------------------------------------------------------------------
Total number of proposal attached
Proposal Name
IP address of the local
node.
Modification
This command is
introduced.
7 19:26:45.752 UTC
7 19:29:25.043 UTC
7 19:30:30.343 UTC
: mypolicy
: 1
: 10.0.0.1
: 1
: proposal1
Command Reference for Cisco NCS 1004
match address local
49