Multiline Appearance; To Answer A Call; To Hold A Call - NEC DT750 User Manual

Multiline Appearance

This feature allows users to accommodate the
lines (other telephone's station number) other than
My Line on the Programmable Line/Feature Keys.
When accommodating other telephone's station
number on the Programmable Line/Feature Key,
the user can answer the call routed to the other
telephone by pressing the key.
For the setting of Multiline Appearance, contact the
System Maintenance Administrator.

To Answer a Call

1. A call is terminated to the telephone whose
station number is accommodated to the
MULTILINE APPEARANCE Feature key.
(ringing and flashing Call Indicator lamp alert
user to incoming call).
MULTILINE APPEARANCE Feature key
31315
Starts to flash
2. Touch the MULTILINE APPEARANCE Feature
key on the display.
Status icon changes as follows:
31315
3. Lift handset to start a conversation.
lamp goes off.
key lamp lights red.
Speaker
Speaker

To Hold a Call

1. Press
HOLD
InPg
To retrieve a held call, press the flashing Line key or ICM
key (Internal Calls).
Calls on System Hold can be retrieved from any multiline
terminal with the held line appearance.
After a preprogrammed time, the held call will recall to
the originating station.
key
71
key to hold the call in progress.
HOLD
Held Station Number
2-13 WED 5:40PM
STA 12345678
ExPg P/U ↓