To Activate A Fixed Marker - Agilent Technologies 8753ET User Manual

Figure 1-16 Marker 1 as the Reference Marker Example
4. To change the reference marker to marker 2, press:

MODE MENU

To Activate a Fixed Marker

When a reference marker is fixed, it does not rely on a current trace to maintain its fixed position. This is
convenient when comparing two different measurement conditions. To activate a fixed marker on the
analyzer, press
Marker
Marker zero puts a fixed reference at the current position of the active marker.
To change to a Delta Marker to a fixed reference marker, press
 
REF= FIXED MKR
Using the
MKR ZERO
Marker zero enters the position of the active marker as the  reference position. Alternatively, you can
specify the fixed point with
off.
1. To place marker 1 at a point that you would like to reference, press:
and turn the front panel knob, or enter a value from the front panel keypad.
Marker
2. To measure values along the measurement data trace, relative to the reference point that you set in the
previous step, press:
and turn the front panel knob, or enter a value from the front panel keypad.
MKR ZERO
3. To move the reference position, press:

MODE MENU
panel knob, or enter a value from the front panel keypad.

REF=2
.
MKR ZERO
.
Key to Activate a Fixed Reference Marker
FIXED MKR POSITION
FIXED MKR POSITION

Marker MODE MENU
. Marker zero is canceled by switching delta mode
FIXED MKR STIMULUS
Making Measurements
Using Markers
and turn the front
1- 29