Step 2: Verify U5303A Shipment Contents - Agilent Technologies U5303A Startup Manual

Step 2: Verify U5303A Shipment Contents

Product serial number. The serial number label is located on the top cover of the module. The serial
l
number can also be read from the Soft Front Panel interface, but only after the hardware is installed.
Description of failure or service required.
l
4. Pack the module in its original ESD bag and packing carton. If the original carton is not available, use bubble
wrap or packing peanuts and place the instrument in a sealed container and mark the container "FRAGILE".
5. On the shipping label, write ATTENTION REPAIR DEPARTMENT and the RMA number.
If any correspondence is required, refer to the product by serial number and model number.
Step 2: Verify U5303A Shipment Contents
The following items are also included with your U5303A PCIe High-Speed Digitizer order:
Part Number Quantity Description
U5303A 1
8121-2530 1
8121-2531 1
8121-2533 1
M9700-10001 1
E2094-60003 1
U5303-90001 1
5962-0476 1
5959-4660 1
9320-6741 1
All the files contained on the CDs are available for download at www.agilent.com/find/U5303A.
10
PCIe High-Speed Digitizer.
Coaxial cable, MMCX to SMA, 1 m.
Auxiliary power cable, 4-Pin Male to Female 4-Conductor Floppy.
Auxiliary power cable, 15-Pin SATA Power Male to Power 4-Pin Floppy.
Agilent MD2 High-Speed Digitizer Software & Product Information CD
Agilent IO Libraries Suite CD.
U5303A Startup Guide in hard copy.
Certificate of Calibration.
Recommended Due Date for Adjustment/Calibration.
ROHS (China addendum).
U5303A Startup Guide