Table of Contents
Advertisement
How to change network settings
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
You can change the LCA network settings as needed so that it connects
properly to your specific network.
Because your network settings are unique to your IT infrastructure,
NOTE
Keysight Technologies will not be able to assist you with connecting your
instrument to your network. Please contact your network administrator
or IT department for assistance. For more information, refer to the MS
Windows resource kit (available from Microsoft) that is appropriate for
your computer system. You can also refer to the online Help for Windows
(Start > Help).
By default, as the instrument starts up, you are logged on as an
NOTE
administrator. On N52xxA PNAs, the default administrator name is
"pna-admin", password "pna". On N52xxB PNAs, the default
administrator name is "instrument", password "measure4you".
Keysight only recommends using the LCA application while you are
logged on as an administrator.
You can change network settings by using the standard Microsoft
Windows functions.
To view or change the computer machine name
1
On the Task bar, click Start, point to Settings, and then click Control
Panel.
2
Double-click the System icon and click on the Computer Name tab.
From here you can view or change the machine name.
3
When you have finished making changes, restart the instrument.
To configure TCP/IP to use DNS or WINS
If using a protocol other than TCP/IP, please contact your IT department
NOTE
for assistance.
Remote Operation
1
11
Advertisement
Table of Contents
