To change the number of clusters
Select the number of clusters by using the selection menu in the Waveform
Analytics tool palette. See the above image.
The change will be applied immediately.
To perform Detail/Retag clustering
1. Check the check box on the cluster icon to select the cluster used for the
2. Set the clustering mode to Detail or Retag. See the above image.
3. Click the clustering icon to perform the clustering. If you have selected the
Keysight CX3300 User's Guide, Edition 4
clustering. Multiple clusters can be selected.
Retag clustering, the Retagging dialog box will open, and you can change the
record name if necessary. The record name must contain only ASCII
characters.
Using the CX3300
Waveform Analytics
77