Figure 1-25 Open Local Area Network To Change The Internet Protocol Settings - Keysight P Series Installation Manual

3 Power on the power meter and wait till you see the LAN LED on the front panel
4 Change your PC's TCPIP properties under LAN properties by providing IP
Figure 1-25
Keysight N8262A Installation Guide
turns solid green.
address, subnet mask and default gateway.
a From the Windows Desktop, select Start > Control Panel > Network
connections.
b Double-click Local Area Connection to open the Local Area Network
Properties window. From the General tab, select Internet Protocol (TCP/
IP).
Open Local Area Network to change the internet protocol
settings
Getting Started
65
1