Protect Against Electrostatic Discharge (Esd); Review The Principles Of Connector Care; Space Requirements - Keysight PNA Series Installation And Service Manual

PNA Series Microwave Network Analyzer System N5251A

Protect Against Electrostatic Discharge (ESD)

This is important. If not properly protected against, electrostatic discharge can seriously
damage your analyzer, resulting in costly repair.
To reduce the chance of electrostatic discharge, follow all of the
recommendations outlined in
on page

Review the Principles of Connector Care

Proper connector care and connection techniques are critical for accurate and repeatable
measurements. Refer to
Prior to making connections to your analyzer, carefully review the information about
inspecting, cleaning, and gaging connectors. Refer to the calibration kit documentation for
detailed connector care information.

Space Requirements

Standard installation of the N5251A system includes configuration and installation of the
system on a customer provided lab bench or table top of adequate size and strength.
N5251A System Weight and Dimensions
Model Weight
2-Port 60.1 kg (132 lb)
4-Port 83.5 kg (183.2 lb) 48 cm (19 in)
Component Weight and Dimensions
Table 3-5 shows the maximum weight and dimensions of the N5251A system components.
Refer also to Figure 4-3 on page 4-7
Installation and Service Guide N5251-90001
1-4.
Table 5-1 on page 5-3
Required Benchtop Dimensions for the System
Clearance
48 cm (19 in)
for test head module dimensions.
"Electrostatic Discharge Protection"
for tips on connector care.
Width Depth
178 cm (70 in) 114 cm (45 in)
178 cm (70 in) 140 cm (55 in)
System Installation
Site Preparation
3-7