Verifying Got Recognizes Connected Equipment - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

1.5

Verifying GOT Recognizes Connected Equipment

Verify the GOT recognizes controllers on [Communication Settings] of the Utility.
• Channel number of communication interface, communication drivers allocation status
• Communication unit installation status
For details on the Utility, refer to the following manual.
Step 1.
After powering up the GOT, touch [GOT basic set]
Step 2.
The [Communication Settings] appears.
Step 3.
Verify that the communication driver name to be used is displayed in the communication interface box to be
used.
Step 4.
When the communication driver name is not displayed normally, carry out the following procedure again.
1 - 36
1.5 Verifying GOT Recognizes Connected Equipment
GOT2000 Series User's Manual (Utility)
1.
2.
1.1Setting the Communication Interface
[Controller] from the Utility.
3.

Advertisement

Table of Contents
loading

Table of Contents