Nat Configuration Examples; One-To-One Static Nat For Internal-To-External Access - H3C MSR 2600 Configuration Manual

Task
Display information about inbound dynamic
NAT.
Display NAT logging configuration.
Display information about NAT NO-PAT entries
(MSR 2600/MSR 3600).
Display information about NAT NO-PAT entries
(MSR 5600).
Display information about outbound dynamic
NAT.
Display NAT Server configuration.
Display internal server group configuration.
Display sessions that have been NATed (MSR
2600/MSR 3600).
Display sessions that have been NATed (MSR
5600).
Display static NAT mappings.
Display NAT statistics (MSR 2600/MSR 3600).
Display NAT statistics (MSR 5600).
Clear NAT sessions.

NAT configuration examples

One-to-one static NAT for internal-to-external access

Network requirements
Configure static NAT to allow the user at 10.1 10.10.8/24 to access the Internet.
Figure 52 Network diagram
Host
10.110.10.8/24
GE1/1 GE1/2
10.110.10.1/24 202.38.1.1/16
Router
Command
display nat inbound
display nat log
display nat no-pat
display nat no-pat [ slot slot-number ]
display nat outbound
display nat server
display nat server-group [ group-number ]
display nat session [ { source-ip source-ip | destination-ip
destination-ip } * [ vpn-instance vpn-name ] ] [ verbose ]
display nat session [ { source-ip source-ip | destination-ip
destination-ip } * [ vpn-instance vpn -name ] ] [ slot
slot-number ] [ verbose ]
display nat static
display nat statistics
display nat statistics [ slot slot-number ]
reset nat session
Internet
127
Server