Gateway Vsi-Interface - H3C MSR 810 Command Reference Manual

Parameters
ipv4-address
wildcard-mask
mask, the 0 bits in a wildcard mask represent "do care" bits, and the 1 bits represent "don't care" bits.
If the "do care" bits in a packet's IP address are identical to the "do care" bits in the specified subnet
address, the packet is assigned to the VSI. All "don't care" bits are ignored. The 0s and 1s in a
wildcard mask can be noncontiguous. For example, 0.255.0.255 is a valid wildcard mask.
ipv6-address prefix-length
length in the range of 1 to 128.
Usage guidelines
You must configure this command on VSIs that share a gateway interface. This command enables
the VSI interface to identify the VSI of a packet.
You can assign a maximum of eight IPv4 and IPv6 subnets to a VSI.
You must specify a gateway interface for a VSI before you can assign subnets to the VSI. If you
remove the gateway interface from the VSI, the VSI's subnet settings are automatically deleted.
For VSIs that share a gateway interface, the subnets must be unique.
Examples
# Assign subnet 100.0.10.0/24 to VSI vxlan.
<Sysname> system-view
[Sysname] vsi vxlan
[Sysname-vsi-vxlan] gateway subnet 100.0.10.0 0.0.0.255

gateway vsi-interface

Use
gateway vsi-interface
Use
undo gateway vsi-interface
Syntax
gateway vsi-interface vsi-interface-id
undo gateway vsi-interface
Default
No gateway interface is specified for a VSI.
Views
VSI view
Predefined user roles
network-admin
Parameters
vsi-interface-id
0 to 8191. You can create a maximum of 256 VSI interfaces.
Usage guidelines
A VSI can have only one gateway interface. Multiple VSIs can share a gateway interface.
Examples
# Specify VSI-interface 100 as the gateway interface for VSI vpna.
<Sysname> system-view
: Specifies an IPv4 subnet address in dotted-decimal notation.
: Specifies a wildcard mask in dotted decimal notation. In contrast to a network
: Specifies an IPv6 subnet address and the address prefix
to specify a gateway interface for a VSI.
: Specifies a VSI interface by its number. The value range for this argument is
to restore the default.
42