Configuring Automatic Updates - Brocade Communications Systems RFS6000 System Reference Manual

3
3. Refer to the following File Systems information.
Name
Available
Formatted This displays the format status of the memory devices. This ensures that the external and internal

Configuring Automatic Updates

Use the Automatic Updates screen to enable a facility that will poll a server address (you designate)
when the switch is booted. If updates are found since the last time the switch was booted, the
updated version is uploaded to the switch the next time the switch is booted. Enable this option for
either the firmware, configuration file, or cluster configuration file. Brocade recommends leaving
this setting disabled if a review of a new file is required before it is automatically uploaded by the
switch.
To enable and configure the automatic update feature for switch firmware, configuration files, and
cluster configurations:
1. Select Switch > Automatic Updates from the main menu tree.
78
Displays the memory locations available to the switch.
Displays the current status of the memory resource. By default, nvram and system are always
available.
•
A green check indicates the device is currently connected to the switch and is available.
•
A red X indicates the device is currently not available.
memory devices store the files securely. A formatted memory device is less prone to crash and loss of
data.
•
A green check mark indicates that the device is currently connected to the switch and is available.
•
A red X indicates that the device is currently not available.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01