Brocade Communications Systems RFS6000 System Reference Manual page 349

2. Click on the Unauthorized APs (AP Reported) tab.
3. The Unauthorized APs (AP Reported) table displays the following information:
BSS MAC Address Displays the MAC Address of each Unapproved AP. These MAC addresses are Access Points observed on the network,
but have yet to be added to the list of Approved APs, and are therefore interpreted as a threat on the network.
If a MAC Address displays on the list incorrectly, click the
AP index.
Reporting AP Displays the numerical value for the radio used with the detecting AP.
Channel Displays the channel the Unapproved AP is currently transmitting on.
Signal Strength (in Displays the Relative Signal Strength Indicator (RSSI) for the detected (and unapproved) AP. AP's with a strong signal
dBm) may pose a more significant risk within the switch managed network.
Last Seen (in Seconds) Displays the time (in seconds) the Unapproved AP was last seen on the network by the detecting AP.
ESSID Displays the ESSID of each Unapproved AP. These ESSIDs are device ESSIDs observed on the network, but have yet
to be added to the list of Approved APs and are therefore interpreted as a threat. If an ESSID displays on the list
incorrectly, click the
4. The Number of Unauthorized APs is simply the sum of all of Unapproved Radio MAC Addresses
5. Select the Display Adopted APs check box.
6. If a radio's MAC address is listed incorrectly, highlight the MAC Address and click the Allow
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Allow
button and add the ESSID to a new Allowed AP index.
detected.
button.
Assign an Index and define the required device address information to move the device into
the list of approved Access Point MAC addresses. The number of Unapproved APs updates
accordingly as devices are added and removed.
Click the Export button to export the contents of the table to a Comma Separated Values file
(CSV).
Allow
button and add the MAC Address of a newly Allowed
6
337