Brocade Communications Systems RFS6000 System Reference Manual page 215

AP Type Displays the type of Access Port detected. The switches support Brocade AP 100,
Brocade Mobility 300 Access Point and Brocade Mobility 650 model Access Ports andBrocade Mobility 7131 Series
model Access Points.
Radio Type Displays the radio type of the corresponding APs.
Available types are:
•
802.11a
•
802.11an
•
802.11b
•
802.11bg
•
802.11bgn
AP Location Displays the current location for the selected AP. The location can be configured on the Access Port Radios
Configuration page.
5. The Radio Rescuer Settings section allows you to configure the following radio rescuer settings
Available Radios Displays a list of radios available to be used as rescuer radios.
Rescuer Radios Displays a list of radios that have been configured as Rescuer Radios.
Add Click the
Remove Click the
Rescuer MAC Displays the Media Access Control (MAC) Address of the selected Rescuer Radio.
AP Name Displays the configured AP Name for the selected Rescuer Radio.
AP Location Displays the configured AP Location for the selected Rescuer Radio.The location can be configured on the Access
Port Radios Configuration page.
Rescuer Power Displays the current power level of the selected Rescuer Radio.
Rescuer Attenuation Displays the current Attenuation power for the selected Rescuer Radio.
6. The Advanced Properties section contains the following configurable items:
Antenna Gain Specify the desired antenna gain in dBi for the selected radio.
Coverage Rate Specify the desired coverage rate for the selected radio from the pull-down menu options.
Lock Detector Enable or disable radio detector mode lock for the selected radio.
Lock TX Power Check this box to lock the TX power for the selected radio.
Lock Channel Check this box to lock the channel for the selected radio.
Lock Rescuer Check this box to lock the rescuer radio for the selected radio.
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.
Viewing Smart RF History
To view Smart RF history:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Smart RF tab
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
and information:
Add
button to add a selected radio or radios from the Available Radios list into the Rescuer Radios list.
Remove
button to remove a selected radio or radios from the Rescuer Radios list.
Click OK to use the changes to the running configuration and close the dialog.
4
203