Brocade Communications Systems RFS6000 System Reference Manual page 217

3. Click the Smart RF Settings button
4. Click the Check All Boxes option in the Smart RF Global Settings dialogue to check every box in
5. Check the Enable Smart RF Module box to enable Smart RF functions on the switch.
6. The Calibration Configuration section contains the following RF calibration settings:
Assign - Detector Check this box to enable automatic assignment of radio detectors.
Assign - Channel Check this box to enable automatic assignment of channels to working radios to avoid channel overlap and avoid
interference from external RF sources.
Assign - Tx Power Check this box to enable automatic assignment of transmit power.
Assign - Rescuers Check this box to enable automatic assignment of rescuers along with rescuing power.
Available The Available box lists all available channels for Smart RF.
Configured The Configured box lists all channels enabled for Smart RF.
Add To add a channel to the configured list, select one or more channels from the Available box and click the
Remove To remove a channel from the configured list, select one or more channels from the Available box and click the
Remove button.
Number of Rescuers Assign a number of radios to dedicate as rescuers. The valid range is between 1 and 5. Default value is 3.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
the configuration window. To uncheck all boxes, click this box a second time.
The remainder of the Smart RF Settings screen is divided into the following four sections:
•
Calibration Configuration
•
Monitoring/Recovery Configuration
•
Diagnostic Configuration
•
Calibration Schedule
4
Add
button.
205