Brocade Communications Systems RFS6000 System Reference Manual page 136

4
Welcome Page URL Define the complete URL for the location of the Welcome page. The Welcome page assumes that the hotspot
user has logged in successfully and can access the Internet. For example, the Welcome page URL can be the
following:
http://192.168.150. 5/welcome.html?ip_address=192. 168.30.1. Here, 192.168.150.5 is the Web server IP
address and 192.168.30.1 is the switch IP address.
Failed Page URL Define the complete URL for the location of the Failed page. The Failed screen assumes that the hotspot
authentication attempt has failed, you are not allowed to access the Internet and you need to provide correct
login information to access the Web. For example, the Failed page URL can be the following:
http://192.168.150. 5/fail.html?ip_address=192. 168.30.1. Here, 192.168.150.5 is the Web server IP
address and 192.168.30.1 is the switch IP address.
No Service Page URL Define the complete URL for the location of the No Service page. The No Service page assumes that the hotspot
user has logged in successfully. This page is displayed when the AP is disconnected from a critical resource
such as its AAA server or the wireless controller to which it is adopted. For example, the No Service page URL
can be the following:
http://192.168.150. 5/noservice.html?ip_address=192. 168.30.1. Here, 192.168.150.5 is the Web server IP
address and 192.168.30.1 is the switch IP address.
5. Refer to the Allow List field, and enter any IP address (for internal or external Web sites) that
NOTE
When using hotspot features in a cluster environment, additional steps must be taken when
specifying the external URLs. In order for the browser to return the login information correctly, the IP
address and port must be specified as part of the URL in the following format:
http://external_url<login | welcome | fail>.html?ip_address=a.b.c.d&port=x
6. Check the Use System Name in Hotspot URL to use the System Name specified on the main
7.
8. Check the Logout on Browser Close button to logout hotspot users from the network when they
9. Enter a value in the Pre-authenticated VLAN field to configure a default vlan to be used until
10. Enter a value in seconds in the Cache Ageout Time field. This is the time in seconds to age out
11. Check the Guest Login checkbox to allow the guest login option.
12. Check the Radius Based checkbox to provide the user a radius authenticated login option.
13. Check the Hotspot failover checkbox to enable the hotspot failover option.
14. Refer to the Status field for the current state of the requests made from applet. This field
15. Click OK to use the changes to the running configuration and close the dialog.
16. Click Cancel to close the dialog without committing updates to the running configuration.
124
may be accessed by the Hotspot user without authentication.
Switch configuration screen as part of the hotspot address.
Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent
unique hotspot users for the selected WLAN.
close their web browsers.
the user gets authorized. Specify the vlan within the range <1-4096>.
the hotspot data ready state after the client disassociation.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01