6
Creating a new Role
To add new role:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the Role tab.
4. Click the Add button.
5. To create a new role configure the following information:
Sequence Number
Enter a sequence number to be associated with each role. Sequence numbers determine the order that role are
applied. Roles with lower sequence numbers are applied before those with higher sequence numbers. Sequence
numbers are assigned when a role is created and cannot be edited.
Role Name
Enter a name for each role. The role name is configured when the role is created and cannot be edited.
AP Location
Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
•
Exact
•
Contains
•
Not Contains
the role
•
Any
ESSID
Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
•
Exact
•
Contains
•
Not Contains
•
Any
376
: The role will only be applied to APs with the exact location string specified in the role
: The role will be applied to APs whose location contains the location string specified in the role
: The role will be applied to APs whose location does not contain the location string specified in
: The role will be applied to any AP Locations
: The role will only be applied when the exact ESSID string specified in the role
: The role will be applied when the ESSID contains the string specified in the role
: The role will be applied when the ESSID does not contain the string specified in the role
: The role will be applied to any ESSIDs
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01