Brocade Communications Systems RFS6000 System Reference Manual page 233

2. Click the Adopted AP tab.
3. Refer to the Adopted AP screen for the following information:
Switch The
enabled on the switch and Cluster GUI is enabled, the
screen. For information on configuring enabling Cluster GUI, see
MAC Address Displays the radio's first MAC address when it is adopted by the switch.
Model Displays the model number of the Access Port.
AP Type Displays the Access Port type.
Serial Displays the serial number of the Access Port, and is used for switch management purposes. It is read-only and
cannot be modified.
HW Version Displays the hardware version of the Access Port. This information can be helpful when troubleshooting
problems with the Access Port.
IP Address Displays the IP address of the adopted Access Port.
Bootloader Displays the software version the Access Port boots from. This information can be helpful when troubleshooting
problems.
Protocol Version Displays the version of the interface protocol between the Access Port and the switch. This information can be
helpful when troubleshooting problems with the Access Port.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Switch
field displays the IP address of the cluster member associated with each AP. When clustering is
Switch
field will be available on the AP configuration
Managing Clustering Using the Web
4
UI.
221