Brocade Communications Systems RFS6000 System Reference Manual page 244

4
1. Select Network Setup > Access Port from the main menu tree.
2. Click the AP Firmware tab.
3. Select an AP Image Type from the AP Image Upload table.
4. Click the Edit button to display a screen to change the AP Image Type or AP Image File.
5. Modify the AP Image Type as necessary.
6. Modify the AP Image File as necessary. You can browse the switch file systems using the
7.
Updating an existing AAP Image Firmware
Use the Update AAP
AP image:
1. Select Networks > Access Port from the main menu tree.
2. Click the AP Firmware tab.
232
browser icon. AP images must be on the flash, system, nvram, or usb file systems in order for
them to be selected.
Click the OK button to save the changes and return to the AP Firmware tab
Image button to update a selected Adaptive AP image firmware. To update an
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01