Layer 3 Mobility - Brocade Communications Systems RFS6000 System Reference Manual

2. Configure redundancy settings using the Command Line Interface or the using the Web UI as
3. Add any redundancy group members using the Command Line Interface or using the Web UI as
4. On the Configuration tab, check the Enable Redundancy checkbox and then check the Enable
5. Click the Apply button to enable the Cluster GUI feature.
6. Once Cluster GUI is enabled a Switch field will be available in many of the Access Port and
NOTE
When accessing the switch Web UI through a NATed interface the Cluster GUI features will only be
accessible if TCP ports 80 and 161 are opened on the router or gateway.

Layer 3 Mobility

Refer to the following sections to configure Layer 3 Mobility:
•
•
•
•
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The Redundancy screen displays with the Configuration tab selected
described in Chapter 5, Configuring Redundancy Settings.
described in Chapter 5, Configuring Redundancy Group Membership.
Cluster GUI box.
mobile unit related screens. The Switch field is displays which cluster members the APs and
Clients are associated with identified by their IP address.
Configuring Layer 3 Mobility
Defining the Layer 3 Peer List
Reviewing Layer 3 Peer List Statistics
Reviewing Layer 3 client Status
5
305