Brocade Communications Systems RFS6000 System Reference Manual page 477

Threshold values for: Use the
WLAN unique to the switch. For information on specific values, see
Use the
Threshold values for:
Switch
Threshold Value unique to the switch. For information on specific values, see
Threshold Values on page
Displays the measurement value used to define whether a threshold value has been exceeded.
Unit of Threshold
Values
Typical values include Mbps, retries and %. For information on specific values, see
Threshold Values on page
4. Select a threshold and click the Edit button to display a screen wherein threshold settings for
5. Use the Maximum Number of Packets to Send a Trap field (at the bottom of the screen) to
6. Click the Apply button to save changes made to the screen since the last saved configuration.
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Threshold Name Threshold Conditions
and
Threshold Name and Threshold Conditions
7-466.
7-466.
the client, AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for
the client, AP or WLAN. Ensure the value set is realistic, in respect to the number of Clients and
APs supporting WLANs within the switch managed network.
enter a value used as the minimum number of data packets required for a trap to be generated
for a target event. Ensure the value is realistic, as setting it to low could generate traps
unnecessarily. Refer to Wireless Trap Threshold Values on page 7-466
information.
Click the Revert button to revert the screen back to its last saved configuration. Changes made
since the contents of the screen were last applied are discarded.
as input criteria to define an appropriate Threshold Value
Wireless Trap Threshold Values on page
as input criteria to define an appropriate
7
7-466.
Wireless Trap
Wireless Trap
for additional
465