Reviewing Firewall and ACL Statistics
Use the Statistics tab to view set of statistics for ACL, DHCP Snoop Entry and Role based firewalls.
Reviewing ACL Statistics
To review ACL statistics:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Statistics tab.
3. From the Statistics section select the Statistics tab.
4. Refer to the following information as displayed within the Statistics tab:
Interface
Interface displays the physical/virtual interfaces used to add the ACL association to the switch.
Action
Displays the permit, deny or mark designation for the ACL. If the action is to mark, the packet is tagged for priority.
Protocol
Displays the permit, deny or mark designation for the ACL. If the action is to mark, the packet is tagged for priority or
"type of service."
Low Source IP
Displays the Low Source IP Address from where the packets are sourced.
High Source IP
Displays the High Source (highest address in available range) IP Address from where the packets are sourced.
Low Destination IP
Displays the Low Destination (lowest address in available range) IP Address.
High Destination IP
Displays the High Destination IP Address.
Packets In
Displays the number of packets (in bytes) transmitted over the ACL.
Packets Out
Displays the number of instances this ACL has been used. Periodically review to determine whether specific ACLs
should be deleted or modified to make relevant.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
6
381