Brocade Communications Systems RFS6000 System Reference Manual page 40

1
IEEE Standard Supported
IEEE 802.11i Yes
IEEE 802.11n Yes
IEEE 802.1x Yes
28
Notes
We fully support the 802.11i standard for encryption and authentication. Additionally we also
implement 802.11i PMK Caching, Opportunistic PMK Caching and Pre-Authentication.
The IEEE 802.11i standard is fully supported on the following Switch Platforms:
•
WS2000
•
WS5100
•
Brocade Mobility RFS6000
•
Brocade Mobility RFS7000
The IEEE 802.11i standard is fully supported on the following AP Platforms:
•
Brocade Mobility 300 Access Point Access Port
•
Brocade Mobility 5181 Access Point
•
Brocade Mobility 5181 Access Point
•
Brocade Mobility 7131 Access Point
The IEEE 802.11n standard is fully supported on the following Switch Platforms:
•
WS5100
•
Brocade Mobility RFS6000
•
Brocade Mobility RFS7000
The IEEE 802.11n standard is fully supported on the following AP Platforms:
Brocade Mobility 7131 Access Point (Standalone and Adaptive)
Full support IEEE 802.1x authentication ether with a fully functional integrated RADIUS server built
into our RF Switches and Access Points or an external RADIUS server such as Microsoft IAS,
Microsoft NPS, Cisco Secure ACS, Free RADIUS and Juniper Steel Belted RADIUS (to name a few).
When using the integrated RADIUS server we support the following EAP methods:
•
EAP-TLS
•
EAP-GTC (PEAPv1)
•
EAP-MSCHAPv2 (PEAPv0)
•
EAP-TTLS (MD5, PAP, MSCHAPv2)
When using an external RADIUS server the EAP type is transparent to the WLAN infrastructure
allowing any standard EAP method to be supported.
The IEEE 802.1x standard is fully supported on the following Switch Platforms:
•
WS2000
•
WS5100
•
Brocade Mobility RFS6000
•
Brocade Mobility RFS7000
The IEEE 802.1x standard is fully supported on the following AP Platforms:
•
Brocade Mobility 300 Access Point Access Port
•
Brocade Mobility 5181 Access Point
•
Brocade Mobility 7131 Access Point
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01