Brocade Communications Systems RFS6000 System Reference Manual page 91

2. Refer to the Switch Configuration field to enable and define the configuration for automatic
Enable Select the
detected (upon the boot of the switch) at the specified IP address.
IP Address Define the
the switch is booted, it is uploaded to the switch and used upon the next boot of the switch.
User ID Enter the
File Name (With Path) Provide the complete and accurate path to the location of the configuration files on the server. This path must
be accurate to ensure that the most recent file is retrieved.
Protocol Use the
medium used for the file update from the server. FLASH is the default setting.
Password Enter the password required to access the server.
NOTE
In addition to the Protocols listed on the Brocade Mobility RFS7000, users can also auto-update
using USB or Compact Flash. On the Brocade Mobility RFS6000, users can also auto-update using
USB.
3. Refer to the Redundancy Configuration field to enable and define the configuration for
Enable Select the
the boot of the switch) at the specified IP address.
IP Address Define the
booted, it will be uploaded to the switch and used upon the next boot of the switch.
User ID Enter the
File Name (With Path) Provide the complete and accurate path to the location of the cluster files on the server. This path must be accurate
to ensure that the most recent file is retrieved.
Protocol Use the
used for the file update from the server. FLASH is the default setting.
Password Enter the password required to access the server.
4. Refer to the Firmware field to enable and define the configuration for automatic firmware
Enable Select the
the boot of the switch) at the specified IP address.
IP Address Define the
booted, it will be uploaded to the switch and used upon the next boot of the switch.
User ID Enter the
File Name (With Path) Provide the complete and accurate path to the location of the firmware files on the server. This path must be
accurate to ensure that the file is retrieved.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
configuration file updates. If enabled, the located (updated) configuration file will be used with
the switch the next time the switch boots.
Enable
checkbox to allow an automatic configuration file update when a newer (updated) file is
IP address
of the server where the configuration files reside. If a new version is detected when
User ID
required to access the FTP or TFTP server.
Protocol
drop-down menu to specify the
automatic cluster file updates.
Enable
checkbox to allow an automatic cluster file update when a new (updated) file is detected (upon
IP address
of the server where the cluster files reside. If a new version is detected when the switch is
User ID
required to access the FTP or TFTP server.
Protocol
drop-down menu to specify the
updates. If enabled, the located (updated) switch firmware is used with the switch the next
time the switch boots.
Enable
checkbox to allow an automatic firmware update when a new (updated) version is detected (upon
IP address
of the server where the firmware files reside. If a new version is detected when the switch is
User ID
required to access the FTP or TFTP server.
FTP, TFTP, HTTP, SFTP,
or resident switch
FTP, TFTP, HTTP, SFTP,
or resident switch
3
FLASH
FLASH
medium
79