Brocade Communications Systems RFS6000 System Reference Manual page 229

2. Click the WLAN Assignment tab.
3. With the Select Radios/BSS field, select the radio type to configure (802.11b, 802.11bg and
4. Select the desired BSS from the BSS list or select a Radio (802.11b, 802.11bg and 802.11bgn
5. Refer to the Select/Change Assigned WLAN field for the following information:
Primary WLAN If a specific BSS was selected from the
drop-down menu as the primary WLAN for the BSS.
If the radio was selected, the applet will automatically assign one WLAN to each BSS in order, and that WLAN will be
set as the
If the number of WLANs selected is greater than the number of BSSIDs, the remaining WLANs are included with the
last BSS.
Assign Assign the WLAN(s) to the selected BSS or Radio.
Index Displays (in ascending order) the numerical index assigned to each SSID. Use the index (along with the WLANs
name) as a means of identifying WLANs once assigned to different radio BSSIDs. A BSSID cannot support two
WLANs with the same numerical index.
Description Use the WLAN description (along with the WLANs index) as a means of identifying WLANs assigned to different radio
BSSIDs. A BSSID cannot support two WLANs with the same description.
ESS ID Displays the assigned SSID uniquely distributed between the WLANs assigned to the BSSIDs.
VLAN Displays the VLAN ID of VLANs assigned to WLANs. By default, all WLANs are assigned to VLAN 1.
6. Click Apply to save the changes made within the screen.
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The Assigned WLANs tab displays two fields: Select Radios/BSS and
Select/Change Assigned WLANs.
802.11bgn or 802.11a and 802.11an) from the Select Radio drop-down menu.
or 802.11a and 802.11an) to modify.
Primary WLAN
for the BSS.
Click Revert to cancel the changes made and revert back to the last saved configuration.
Select Radio/BSS
area, choose one of the selected WLANs from the
4
217