Brocade Communications Systems RFS6000 System Reference Manual page 293

Provides centralized wireless lan (wlan)
Hide thumbs Also See for RFS6000:
Table of Contents

Advertisement

5. Use the Class Name field to associate an existing class, created using Adding a New DHCP
6. Refer to the Pool Class Address Range field to revise an address range. A maximum of 4
7.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Adding a New DHCP Pool Class
The Add DHCP Pool Class Configuration dialog is used to associate an existing class, created using
Adding a New DHCP User
also used to configure a maximum of 4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server from the main menu tree.
2. Select the Pool Class tab.
3. Click on the Add button from the Pool Class Names section.
4. Use the Pool Name field to define a new pool name. Enter the pool name created using Adding
5. Use the Class Name field to associate an existing class, created using Adding a New DHCP
6. The Pool Class Address Range field is used to assign address range to the class inside the
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
User Class on page 5-277.
address ranges can be assigned to a class.
a. Use the Insert button to revise the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
Refer to the Status field. It displays the current state of the requests made from the applet.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the switch.
Class, to an existing pool, created using
a New DHCP Pool on page 5-264.
User Class on page 5-277.
pool. A maximum of 4 address ranges can be assigned to a class.
a. Use the Insert button to enter the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
Adding a New DHCP
Pool. It is
5
281

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfs4000Rfs7000

Table of Contents