3
Viewing the Port Configuration
The Configuration tab displays the current configuration for the switch ports. Use the port
configuration information to determine whether an existing port configuration can be used as is or
requires modification for use within the switch managed network.
To view configuration details for the uplink and downlink ports:
1. Select Switch > Ports from the main menu tree.
2. Select the Configuration tab to display the following read-only information:
Name
Aggregation Membership
(Brocade Mobility
RFS7000, Brocade
Mobility RFS4000)
MAC Address
Admin Status
52
Displays the current port name. The port names available vary by switch.
Brocade Mobility RFS6000: ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1, wan
Brocade Mobility RFS7000: ge1, ge2, ge3, ge4, me1
Brocade Mobility RFS4000: ge1, ge2, ge3, ge4, ge5. up1
The Aggregation Membership value displays the channel group the port is a member of.
Displays the port's MAC Address. This value is read-only, set at the factory and cannot be
modified.
Displays whether the port is currently Up or Down.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01