Brocade Communications Systems RFS6000 System Reference Manual page 267

5. Refer to the Allow List field, and enter any IP address (for internal or external Web sites) that
6. Check the Use System Name in Hotspot URL to use the System Name specified on the main
7.
8. Check the Logout on Browser Close button to log out hotspot users from the network when they
9. Use the Accounting drop-down menu to retrieve accounting information from the
10. Refer to the Status field for the current state of the requests made from applet. This field
11. Click OK to use the changes to the running configuration and close the dialog.
12. Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
g. Specify the appropriate Path name to the hotspot configuration on the local system disk or
server.
h. Once the location and settings for the advanced hotspot configuration have been defined,
click the Install button to use the hotspot configuration with the switch.
may be accessed by the Hotspot user without authentication.
Switch configuration screen as part of the hotspot address.
Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent
unique hotspot users for the selected WLAN.
close their web browsers.
switch-managed network. You can select None, Radius, or Syslog from the menu for retrieving
the accounting information.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
4
255