Configuring Wireless Filters - Brocade Communications Systems RFS6000 System Reference Manual

Editing an Adaptive AP LAN
To Edit an AAP LANs page:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
4. On the Attach AAP WLAN tab select a WLAN and click the Edit button:
AP MAC Address
LAN Index
ACL ID: Inbound
ACL ID: Outbound
5. Refer to the Status field for the state of the requests made from applet. This field displays error
6. Click OK to use the changes to the running configuration and close the dialog.
7.

Configuring Wireless Filters

Use filters to either allow or deny a MAC address (or groups of MAC addresses) from associating
with the switch. Refer to the Wireless Filters screen to review the properties of existing switch
filters. A filter can be selected from those available and edited or deleted. Additionally, a new filter
can be added if an existing filter does not adequately express the client's address range required.
To display the Wireless Filters main page:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Displays the MAC Address of the selected Adaptive AP. This value cannot be modified.
The LAN Index displays the list of attached Adaptive AP LANs with ACLs.
Edit the Inbound ACL ID for the selected Adaptive AP.
Edit the Outbound ACL ID for the selected Adaptive AP.
messages if something goes wrong in the transaction between the applet and the switch.
Click Cancel to close the dialog without committing updates to the running configuration.
6
357