Editing Port Poe Settings - Brocade Communications Systems RFS6000 System Reference Manual

If you have modified the Power Usage Threshold for Sending Trap value, click the Apply button to
save the changes.
Port
PoE
Class
Priority
Limit
(watts)
Power
(watts)
Voltage
(volts)
Current
(mA)
Status

Editing Port PoE Settings

To modify the PoE settings for a port:
1. Select a port to edit from the table.
2. Click the Edit button.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Displays the port name for each of the PoE capable ports.
Displays the PoE status of each PoE capable port. Status will display Up when PoE is available on the
port and Down when PoE is unavailable on the port.
Displays the IEEE Power Classification for each port:
Class Number
0
(unknown)
1
2
3
Displays the priority mode for each of the PoE ports.
The priority options are:
•
Critical
•
High
•
Low
Displays the power limit in watts for each of the PoE ports. The maximum power limit per port is 36
watts.
Displays each PoE ports power usage in watts.
Displays each PoE ports voltage usage in volts.
Displays each PoE ports current usage in milliamps.
Displays the operational status for each PoE port. Ports can be either
The PoE Edit screen shows the port PoE status, Priority, and Power Limit.
Maximum Power Required from Switch
15.4 Watts
4 Watts
7 Watts
15.4 Watts
On Off
or .
3
61