Viewing Access Port Information - Brocade Communications Systems RFS6000 System Reference Manual

Average Jitter Displays the average jitter time for calls on the displayed Clients. Jitter is delays on the network that can result in a
lag in conversations. A jitter score higher than 150ms is likely to be noticed by end users during a call.
Average Latency
Displays the average latency in milliseconds for calls on the selected Clients.
Start Time Displays the start time for this call. This is the timestamp of the start of the call on the switch.

Viewing Access Port Information

The Access Ports screen displays a high-level overview of the APs created for use within the switch
managed network. Use this data as necessary to check all the APs that are active, their VLAN
assignments, updates to AP description as well as their current authentication and encryption
schemes.
NOTE
Up to 256 Access Ports are supported by the Brocade Mobility RFS6000 and Brocade Mobility
RFS7000 switches. Up to 6 Access Ports and 24 Adaptive APs are supported by the Brocade Mobility
RFS4000 switch. The actual number of Access Ports adoptable by a switch is defined based on
access port or Adaptive AP licenses and on a per platform basis and will typically be lower than 256.
NOTE
The Brocade RF Management Software is a recommended utility to plan the deployment of the
switch and view its configuration once operational. Brocade RFMS can help optimize the positioning
and configuration of a switch and Access Ports in respect to a WLAN's client throughput
requirements. For more information, refer to the Brocade Website.
The Access Ports screen consists of the following tabs:
•
•
•
•
•
•
•
Configuring Access Port Radios
Refer to the Configuration tab to view existing radio configurations available to the switch. After
reviewing the radios listed, you have the option of editing a radio's properties, deleting a radio,
adding a new radio, resetting a radio, scanning available channels, or exporting a radio.
To view Access Port Radio configuration details:
1. Select Network > Access Port Radios from the main menu tree.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Configuring Access Port Radios
Viewing AP Statistics
Configuring WLAN Assignment
Configuring WMM
Configuring Access Point Radio Bandwidth
Configuring Radio Groups for client Load Balancing
Viewing Active Calls (AC) Statistics
4
171