Brocade Communications Systems RFS6000 System Reference Manual page 483

2. Click the Add button within the Local Users tab.
3. Enter the login name for the user in the Username field. Ensure this name is practical and
4. Enter the authentication password for the new user in the Password field and reconfirm the
5. Select the role you want to assign to the new user from the options provided in the Associated
Monitor Select
provides read-only permissions.
Help Desk Manager Assign this role to someone who typically troubleshoots and debugs problems reported by the customer. The
Help Desk Manager typically runs troubleshooting utilities (like a sniffer), executes service commands,
views/retrieves logs and reboots the switch.
Network Administrator The
VLANs, Layer 2/Layer 3 security, WLANs, radios, IDS and hotspot.
System Administrator Select
licenses, perform image upgrade, auto install, manager redundancy/clustering and control access.
Web User Administrator Assign
Super User Select
NOTE
There are some basic operations/CLI commands (exit, logout and help) available to all user roles.
All the roles except Monitor can perform Help Desk role operations.
6. Select the access modes to assign to the new user from the options provided in the Access
Console
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
identifiable to the user.
same again in the Confirm Password field.
Roles panel. Select one or more of the following options:
Monitor
to assign regular user permissions without any administrative rights. The Monitor option
Network Administrator
System Administrator
Web User Administrator
Super User
to assign complete administrative rights.
Modes panel. Select one or more of the following options:
This option provides the new user access to the switch using the console.
has privileges to configure all wired and wireless parameters like IP config,
to allow the user to configure general settings like NTP, boot parameters,
privileges to add users for Web authentication (hotspot).
7
471