Brocade Communications Systems RFS6000 System Reference Manual page 469

1. Select Management Access > SNMP Access from the main menu tree.
2. Select the V3 tab from within the SNMP Access screen.
3. Refer to the fields within the V3 screen for the following information:
User Name Displays a read-only SNMP v3 username of operator or Admin. An operator typically has an Access Control of
read-only and an Admin typically has an Access Control of read/write.The username string length is <0-3>.
Access Control Displays a read-only (R) access or read/write (RW) access for the v3 user. Read-only access allows the user (when
active) to retrieve information, while read/write access grants the user modification privileges.
Authentication Displays the current authorization scheme used by this user for v3 access to the switch. Click the
modify the password required to change authentication keys.
Encryption Displays the current Encryption Standard (DES) protocol the user must satisfy for SNMP v3 access to the switch.
Click the
Status Displays whether this specific SNMP v3 User Name is active on the switch. For more information, see
SNMP v2/v3 Statistics on page
4. Highlight an existing v3 entry and click the Edit button to modify the password for the Auth
5. Highlight an existing SNMP v3 User Name and click the Enable button to enable the log-in for
6. Highlight an existing SNMP v3 User Name and click the Disable button to disable the log-in for
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Edit
button to modify the password required to change encryption keys.
7-458.
Protocol and Priv Protocol.
For additional information, see Editing an Existing SNMP v1/v2 Community Name on page
7-456
the specified user. When selected the status of the user is defined as active.
the specified user. When selected the status of the user is defined as inactive.
7
Edit
button to
Accessing
457