Brocade Communications Systems RFS6000 System Reference Manual page 442

6
2. Select the Groups tab.
3. Refer to the user groups listed to review the following read-only attributes for each group:
Name Displays the unique name assigned to each group. The group name should be indicative of the user population
within and their shared activity within the switch managed network.
Guest Group Displays whether a specific group has been defined as a guest group (indicated with a green check mark) or has
been configured as permanent group (indicated with a red X). Guest users have temporary Radius server access.
VLAN ID Display the VLAN ID(s) used by each group. The VLAN ID is representative of the shared SSID each group member
(user) employs to interoperate with one another within the switch managed network (once authenticated by the local
Radius server).
Time of Access Start Displays the time each group is authenticated to interoperate within the switch managed network. Each user within
the group is authenticated with the local Radius server. Group members successfully authenticated are allowed
access to the switch managed network under the restrictions defined for that group.
Time of Access End Displays the time each group's user base will loose access privileges. After this time, users within this group will not
be authenticated by the local Radius server. However, if a user is part of a different group that has not exceeded their
access interval, then the user may still interoperate with the switch (remain authenticated) as part of that group.
4. Refer to the WLANs Assigned area of the Groups tab to review which switch WLANs are
5. Refer to the Time of access in days field to assess the intervals (which days) the group has
430
available for use with configured groups.
been assigned access to the switch managed network (after each user has been
authenticated). At least one day is required.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01