Igmp Snoop Configuration - Brocade Communications Systems RFS6000 System Reference Manual

IGMP Snoop Configuration

Use the IGMP Snoop Config tab to view and configure IGMP Snoop Configuration).
To view and configure IGMP Snoop details:
1. Select Network > IGMP Snooping from the main menu tree.
2. Select the IGMP Snoop Config tab
Snoop Enable Select to enable IGMP Snooping on the switch. If disabled, snooping on a per VLAN basis is also disabled.
Unknown Multicast Select to enable the switch to forward Multicast packets from unregistered Multicast Groups. If disabled, Unknown
Forward Multicast Forward on a per VLAN basis is also disabled.
Apply Click to
Revert Revert back to previous state from the running configuration.
Vlan Index The VLAN index on which IGMP Snooping is enabled.
Snoop Enable The status of IGMP Snooping. Disabled for the selected VLAN if the screen displays a red cross mark.
Unknown Multicast The status of forwarding IGMP Multicast packets from unregistered Multicast Groups. Disabled for selected VLAN if
Forward the screen displays a red cross mark.
Learning Mode Indicates how the switch learns IGMP Snooping information. Can be one of pimDvmrp or static.
Multicast Router Ports Lists the ports used for Multicast Routing. Can be one of the available ge ports.
IGMP Snoop Querier Configuration
Use the IGMP Snoop Querier Config tab to view and configure IGMP Snoop Querier Configuration.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The IGMP Snoop Config tab displays the following information:
Apply
changes made to the running configuration.
4
245