6
DHCP Trust
Select to enable DHCP trust on this WLAN. When disabled, any DHCP packets received on the interface is dropped.
ARP Trust
Select to enable ARP trust on this WLAN. ARP packets received on this interface are considered trusted and
information from these packets is used to identify rogue devices.
ARP Rate
Enter the Address Resolution Protocol (ARP) threshold.The ARP threshold determines the number of ARP packets
permissible per second. Rates can be between 0 and 1000000
6. Refer to the Status field for the state of the requests made from applet. This field displays error
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Denial of Service (DoS) Attack Firewall Rules
To review Denial of Service Attack firewall rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the DoS Attack tab.
372
messages if something goes wrong in the transaction between the applet and the switch.
Click OK to use the changes to the running configuration and close the dialog.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01