Brocade Communications Systems RFS6000 System Reference Manual page 160

4
Transmit Ops Displays the maximum duration a device can transmit after obtaining a transmit opportunity. For higher-priority
traffic categories, this value should be set to a
low number.
CW Min The CW Min is combined with the CW Max to make the Contention screen. From this range, a random number is
selected for the back off mechanism. Lower values are used for higher priority traffic.
CW Max The CW Max is combined with the CW Min to make the Contention screen. From this range, a random number is
selected for the back off mechanism. Lower values are used for higher priority traffic.
Max Retries Displays the maximum number of retries for each WMM index.
NOTE
When using a Brocade Mobility 7131 Series Access Point in Adaptive AP Mode, you must enable
WMM on the associated WLAN in order to achieve the highest data rates available.
3. Click the Edit button to display a screen used to modify the WMM parameters. For more
4. Select the QoS Mappings button to revise the existing mappings of access category to 802.1p
148
information, see Editing WMM Settings on page 4-149.
and DSCP to access category settings.
With a drastic increase in bandwidth absorbing network traffic (VOIP, multimedia, etc.), the
importance of data prioritization is critical to effective network management.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01